Archive for category leaf blowers

RedMax Leaf Blower Video Review

Hi Everyone:

This is Keith from www.StartALawnCareBusiness.com. Today, I am reviewing the RedMax EBZ8001 Commercial backpack blower.

My brand new 8001 arrived well boxed in sturdy corrugated packaging. Apart from the blower tubes, the unit itself was fully assembled. A standard wrench, a hex wrench, and a sparkplug wrench were included for quick assembly of the blower tubes and standard maintenance.

With my order, the folks at RedMax were kind enough to include 6 bottles of 50:1 2 cycle oil.

The first thing I noticed about the RedMax was its considerable heavy duty construction. Its size over normal consumer model backpack blowers is impressive.

The RedMax 8001 is powered by an air cooled 2-cycle engine. The engine size is a massive 71.9cc’s capable of moving 915 cubic feet per minute at over 200 mph. It has a digital ignition for easy start and uninterrupted operation.

I was very impressed with the construction of the air filter chamber. Poor air filter design shortens the life of many consumer model blowers. The RedMax 8001 relies on a 2 stage air filter. The first stage is a foam filter. This is a dry filter and RedMax does not recommend oiling the foam stage before use. The second stage is a paper filter. This filter system is vital to long life of engines subject to dusty environments. Access to the filter chamber is made easy by two red oversized tightening knobs at the top of the unit. After mixing 1 bottle of 2 cycle oil with 1 gallon of gasoline, I was ready to fuel my blower. RedMax recommends the use of non-ethonal enhanced fuels as Gasohol can cause deterioration of rubber and/or plastic parts. This made finding gasoline difficult since all gas stations in my area sell E-10 fuel. With a fuel tank capacity of 77.7 fluid ounces and a fuel consumption rate of 64.3 fluid ounces per hour, the RedMax 8001 should be able to operate for well over one hour of continuous use between refuelings.

Engine throttle is adjusted during use by the operator via a control arm. The control arm swivels into position for easy access during use. A red stop button on the control arm allows the operator to switch the engine off when work is completed.

Airflow is directed by use of a swivel tube, a flex tube, and extended blower tubes. A grip assembly allows the operator to direct airflow to the desired area.

Starting procedure is the same as most two cycle lawn equipment engines. Throttle is set and a primer bulb is depressed approximately 6 times. The engine cranks with a pull rope. My engine normally cranks by the 1st or 2nd pull.

With a 200 mph stream of air, the Redmax makes quick work of heavy leaf cover. Moving 915 CFM of air, leaves that would otherwise be able to hide around the corners of this picnic table are quickly done away with.

When my work was complete, I decided to have some fun while learning more about the Redmax. Stepping on a scale with the throttle on low, my weight was 194 lbs. Opening the throttle all the way and pointing the blower tube straight down, the Redmax provided 7 lbs of thrust reducing my weight to 187 lbs.

Next, I did the brick test. Placing a standard brick on a concrete patio surface, the redmax was able to blow the brick over 63 inches.

Lastly, I put the Redmax’s 7 lbs of thrust to use on a blower powered lawn cart. I don’t recommend you try this as I almost fell out of the cart.

Warning: Follow all safety precautions included in your blower’s instruction manual.

I would like to thank Redmax as well as lawn and garden webvision.

Please visit our website at: www.StartALawnCareBusiness.com for more product reviews and help in starting and operating your lawn care business.

Tags: , , , ,

Leaf Relief – Leaf Raking Season Is Upon Us

Lawn Care is a seasonal business.  Luckily for us, there’s money to be made all seasons of the year.

We are in peak leaf raking season.  Leaves are still falling off the trees and customers who vowed to wait for all the leaves to fall before doing their raking are calling urgently to get their yards cleaned up before winter sets in.

leafrelief

I have been associated with the lawn care industry since 1992 and it never ceases to amaze me how much money can be made the last two months of the year dealing with customer’s leaves.

I love when prospective customers try to rake their own leaves.  Sure, in a small yard the homeowner can deal with the leaves.  But, in yards with several sweet gum trees, the volume of leaves can be overwhelming and they call us in as a last attempt to get the leaves handled.

Since they already know what hard work leaf raking is, they don’t put up too much of a fight to pay a premium price to clear their yards once and for all.

Leaf raking season between Thanksgiving and the end of the year is a blessing also because it gives a great chance to boost your bottom line for the year and put some extra spending money in your pocket before Christmas.

We’ve put a video on YouTube giving a couple leaf raking tips if you are using a tarp to haul and dump your leaves, check our video below:

Tags: , , ,

Ethanol Gasoline in Small Lawn Mower Engines

Does ethanol damage lawn mower engines?

As lawn care business owners, we strive to provide proper maintenance for our lawn equipment. Equipment engine oil is changed regularly. Air filters are cleaned and/or replaced when they become dirty. Lubrication is performed on schedule as outlined in owners’ manuals.

In addition to routine maintenance, there are many other tips we can follow to help extend lawn equipment life. We cover many tips within the pages of our Lawn Care Business Guidebooks.

One of the simpler actions we can take, on a daily basis, is use of high quality gasoline. High quality does not necessarily mean high octane. High quality, in many people’s opinion, means a lack of impurities.

There is a gas station not far from our business location that charges a few cents per gallon less than competing station. However, the gas station is more than 40 years old and it looks dilapidated. A gas station in such poor condition makes us wonder about the condition of their fuel tanks. If their tanks are corroded and contain residue from years of being underground, could those impurities find their way into our gas tanks?

Though ethanol is not considered an impurity to industry insiders, many small engine mechanics speak up about damage caused by ethanol. According to an MSNBC article on damage to small lawn mower engines caused by ethanol in gasoline ethanol attracts moisture which prevents oil within lawn care equipment from doing its proper job. This moisture reacts with rubber and plastic fittings and hoses. As these parts deteriorate, they may clog openings within the engine and can cause a shellacking on pistons resulting in reduced lubrication. All this is according to small engine experts.

Don’t rely strictly on experts though, read the many comments in this blog from www.TheTruthAboutCars.com dealing with the hazards of using ethanol blended gasoline in many different types of engines.

In the southern states where we live, 10% ethanol has been a fact of life since early 2008. Though we have heard horror stories of damage done by ethanol, we rarely have a choice other than to use an ethanol gasoline blend.

Times are beginning to change, though, and we see signs that gas stations are offering 100% gasoline again. In fact, a brand new gas station with brand new tanks, less than half a mile from the old dilapidated gas station offering 10% ethanol, has just opened. This new gas station does not add ethanol and offers pure gasoline.

noethanol

Ahh…no contamination and no ethanol. Our lawn mowers and two-cycle leaf blowers, weedeaters, and other lawn care equipment will run “clean” once more.

For more information on dealing with commercial lawn mower questions as well as running your own lawn care business, visit our website: www.StartALawnCareBusiness.com

Raynaud’s Syndrome and Lawn Care Workers

As the year draws on and weather gets colder, I want to take a moment to mention a condition that can affect lawn care workers who use weedeaters, edgers, leaf blowers, and other vibration-heavy tools during cool and cold weather months.

I first became aware of the existence of Raynaud’s Syndrome and its risks to lawn care business workers my first year in the lawn care business while reading the instruction manual of a new professional weed eater I had just purchased. I have operated weedeaters for many years and I know proper operating technique. However, as a matter of course, I read the instruction manual and learned of a health risk I had never perceived.

The manual’s caution mentioned that workers enduring several hours of vibration each day (especially during cold weather) from power equipment were at greater risk of effects from Raynaud’s Syndrome.

According to Wikipedia, Raynaud’s syndrome is a hyperactivation of the sympathetic system causing extreme vasoconstriction of the peripheral blood vessels, leading to tissue hypoxia.

I am not a doctor and I don’t exactly know what the above paragraph means. However, I do know, after reading my instruction manual, to be aware of excess vibration from weedeaters, edgers, and blowers during cold weather.

In the “StartALawnCareBusiness.com” lawn care business training materials, we make note that you should keep a close check on your health and you should get regular health checkups from your health care professional. A checkup is also advised before you start your business work simply to understand your general health and diagnose any underlying health concerns.

Of great importance (and the general gist of this blog post) is to always read and follow the instruction manuals for all of your lawn care equipment. You many think instruction manuals are only filled with common sense and you already know how to operate each piece of lawn care equipment. However, there is valuable information within those manuals and it is wise to read them completely so you fully understand proper usage and cautions (known and unknown) of your lawn care equipment. Though I am very familiar with most types of lawn care equipment, I always read the instruction manual thoroughly before operating any new piece of equipment. I advise you to do the same.

You never know what you don’t yet know.

Disclaimer: This blog does not provide medical or professional advice of any sort. You should seek advice from your health care provider for answers to all questions you may have.

Tags: , , , ,